Rev broaching tool

REV BROACHING TOOL


RESHARPENERS for INSERTS

resharpeners for broaching inserts

Using re-sharpening rods, the inserts can be re-sharpened using a standard grinding wheel. When the broached or slotted surface starts getting rough due to prolonged insert use, it will require re-sharpening.
In order to do so, unscrew the insert from the broaching machine and screw it onto the re-sharpening rod. Next, place the insert near the grinding wheel, maintaining the original inclination and, then, remove the worn material. It is important to remember that only the cutting surface must be screwed on.
The re-sharpening rod has a comfortable grip and ensures that the insert protrudes from the rod, making sharpening easier to perform.
This accessory is available in 5 types: RF-1 to re-sharpen inserts of 3-4-5 mm, RF-2 for inserts of 6-8 mm, RF-3 for inserts of 10-12 mm, RF-4 for inserts of 14-16mm, RF-5 for inserts of 18-25 mm.

resharpeners for broaching inserts

REV_006
REV_005
9814
buone-23
buone-27
P1030176copia
IMG_0966
IMG_0933
REV_004
buone-29